Enterasys Matrix 7H4385-49 Guía de instalación descargar pdf (Pagina 52)

Changing Trusted Access Gateway Settings

4-4 Enterasys Sentinel Trusted Access Gateway Setup

22. LaunchtheEnterasysSentinelTrustedAccessManagerfromyoursystem:

Start–>ProgramFiles–>EnterasysNetworks–>EnterasysSentinelTrustedAccess

Manager

23. IfthisisyourinitialcommissioningoftheMSM,selectGettingStartedfromtheHelp

pull‐downmenuforinformationonusingTrustedAccessManagerinyournetwork.

Ifyouareupgrading

yourTrustedAccessGatewaysoftware,besuretoenforcethe

TrustedAccessGateway(viaTrustedAccessManager)followingtheupgrade

operation.EnforcingwritesyourTrustedAccessManagerSecurityDomain

informationtothegateway.

Changing Trusted Access Gateway Settings

UsethesestepsinthissectionifyouneedtochangeyourTrustedAccessGatewaysettings

followingyourinitialcommissioning.

Changing Basic Network Configuration

TochangebasicnetworkconfigurationsettingssuchasMSMhostnameandIPaddress,

enterthefollowingcommandattheMSMCLI:

/opt/tag/dnetconfig/

Thiswillstartthenetworkconfigurationscriptandallowyoutomaketherequired

changes.Youmustrebootthesystemforthenewsettingstotakeeffect.

Changing the Management Server IP Address

TochangetheIPaddressofthemanagementserver,enterthefollowingcommandatthe

MSMCLI:

/opt/tag/configMgmtIP <IP address>

Then,startusingthenewmanagementserverbytyping:

tagctl restart

Enabling the SNMP Daemon

ToenabletheSNMPdaemon,enterthefollowingcommandattheMSMCLI:

/usr/postinstall/snmpconfig

Then,starttheSNMPdaemonbyentering:

/etc/rc.d/rc.net-snmp restart

IfyoureboottheMSM,theSNMPdaemonwillstartautomatically.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 65 66

Sin comentarios

Enterasys Matrix 7H4385-49 Guía de instalación Pagina 52