Enterasys ROAMABOUT RBT-1602 Guía de instalación descargar pdf (Pagina 34)

Introduction

1-6

Ethernet Port

The access point has one 10BASE-T/100BASE-TX RJ-45 port that can be attached

directly to 10BASE-T/100BASE-TX LAN segments. These segments must conform to the

IEEE 802.3 or 802.3u specifications.

This port supports automatic MDI/MDI-X operation, so you can use straight-through

cables for all network connections to PCs, switches, or hubs.

The access point appears as an Ethernet node and performs a bridging function by

moving packets from the wired LAN to remote workstations on the wireless infrastructure.

Note: The RJ-45 port also supports Power over Ethernet (PoE) based on the IEEE 802.3af

standard. Refer “Power Connector” on page 1-7, for information on supplying power

to the access point’s network port from a network device, such as a switch, that

provides Power over Ethernet (PoE).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 77 78

Sin comentarios

Enterasys ROAMABOUT RBT-1602 Guía de instalación Pagina 34