Enterasys 5C105 Guía de instalación descargar pdf (Pagina 30)

Unpacking the Module

3-2

3.1 UNPACKING THE MODULE

Unpack the module as follows:

1. Open the box and remove the packing material protecting the module.

2. Verify the contents of the carton as listed in Table 3-1.

3. Remove the tape seal on the non-conductive bag to remove the module.

4. Perform a visual inspection of the module for any signs of physical damage. Contact Enterasys

Networks if there are any signs of damage. Refer to “Getting Help” in About This Guide for

details.

5. If you are installing an optional 5PIM in the module, the 5PIM must be installed before

installing the module into the E5 chassis. To install the 5PIM, proceed to Section 3.2 for

instructions.

Table 3-1 Contents of Module Carton

Item Quantity

One module, either the 5H152-50 or the 5H153-50 1

Antistatic Wrist Strap 1

Manual Accessory Kit 1

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

Sin comentarios

Enterasys 5C105 Guía de instalación Pagina 30