Enterasys 802.1Q Manual de usuario descargar pdf (Pagina 6)

Assigning Port VLAN IDs (PVIDs) and Ingress Filtering

14-6 802.1Q VLAN Commands

show port vlan

ThiscommanddisplaysportVLANidentifier(PVID)information.PVIDdeterminestheVLANto

whichalluntaggedframesreceivedononeormoreportswillbeclassified.

Syntax

show port vlan [port-string]

Parameters

Defaults

Ifport‐stringisnotspecified,portVLANinformationforallportswillbedisplayed.

Mode

Switchcommand,read‐only.

Example

ThefollowingexampledisplaysPVIDsassignedtoGigabitEthernetports1through6inslot5.In

thiscase,untaggedframesreceivedontheseportswillbeclassifiedtoVLAN1:

matrix-x(switch-su)#show port vlan ge.5.1-6

ge.5.1 is set to 1

ge.5.2 is set to 1

ge.5.3 is set to 1

ge.5.4 is set to 1

ge.5.5 is set to 1

ge.5.6 is set to 1

port‐string (Optional)DisplaysPVIDinformationforspecificport(s).

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Sin comentarios

Enterasys 802.1Q Manual de usuario Pagina 6