Enterasys Matrix N7 7C107 Guía de instalación descargar pdf (Pagina 90)

Memory Replacement Procedures

B-8 Mode Switch Settings and Installing Options

Installing the DIMM

ToinstallaDIMM,refertoFigure B‐7andproceedasfollows:

1. PushtheconnectorarmsawayfromtheDIMMenoughtoinserttheDIMMintothe

connectorcontacts.

2. InserttheDIMMstraightdownbetweentheconnectorcontactsenoughforthetabs

ontheconnectorarmstoalignwiththetwoDIMM

alignmentnotches.

3. PushtheDIMMdownintotheconnectorcontacts.Thenrotatethetwoconnector

armstowardtheDIMMtolockitintoplace.

4. ThiscompletestheinstallationoftheDIMM.

Figure B-7 Installing the DIMM

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 DIMM Connector arms 3 Connector contacts

2 DIMM 4 DIMM alignment notches (2)

1 2 ... 85 86 87 88 89 90 91 92 93 94

Sin comentarios

Enterasys Matrix N7 7C107 Guía de instalación Pagina 90