Enterasys C2RPS-SYS Guía de instalación descargar pdf (Pagina 24)

Connectivity

1-4 Introduction

Connectivity

TheswitchconnectstoEthernetnetworksorworkstationsviathefixedfrontpanelRJ45

connectorsandfouruplinkportsthatsupportoptionalMini‐GBICs.

Atthetimeofthisprinting,theMini‐GBICsthatareavailablefromEnterasysand

supportedbyC3switchesaredescribedinTable 1‐1below.TheseMini‐

GBICsmeetor

exceedtheIEEE802.3z‐1998standard.

Management

Managementofthemodulecanbeeitherin‐bandorout‐of‐band.In‐bandremote

managementispossibleusingTelnet,Enterasys Networks’NetSight

management

application,ortheWebViewapplication.Out‐of‐bandmanagementisprovidedthrough

theDB9ConsoleportconnectoronthefrontpanelusingaVT100terminaloraVT 100

terminalemulator.

Switch Configuration Using WebView

Enterasys Networks’HTTP‐basedWebmanagementapplication(WebView)isan

intuitivewebtoolforsimplemanagementtasks.

Table 1-1 Description of Mini-GBICs

Mini-GBIC Specification

MGBIC-LC01 Provides one 1000BASE-SX compliant LC fiber-optic multimode port and a

standard LC connector. For optical and operating range specifications, refer to

“MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)” on page A-4.

MGBIC-LC03 Provides one 1000BASE-SX compliant LC fiber-optic multimode port with a

standard LC duplex connector. For optical and operating range specifications,

refer to “MGBIC-LC03 Specifications (1000BASE-SX)” on page A-4.

MGBIC-LC09 Provides one 1000BASE-LX compliant LC fiber-optic single-mode port with a

standard LC connector. For optical and operating range specifications, refer to

“MGBIC-LC09 Specifications (1000BASE-LX)” on page A-5.

MGBIC-MT01 Provides one 1000BASE-SX compliant LC fiber-optic multimode port with a

standard MT-RJ connector. For optical and operating range specifications,

refer to “MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)” on

page A-4.

MGBIC-08 Provides one 1000BASE-ELX compliant LC fiber-optic single-mode port with a

standard LC connector. For optical and operating range specifications, refer to

“MGBIC-08 Specifications (1000BASE-ELX)” on page A-5.

MGBIC-02 Provides one RJ45 copper connection that is compliant with the 1000BASE-T

standard RJ45 connector. For operating range specifications, refer to

“MGBIC-02 Specifications (1000BASE-T)” on page A-6.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 77 78

Sin comentarios

Enterasys C2RPS-SYS Guía de instalación Pagina 24